10000 LPH RO System

R552,000.00

Reverse osmosis is capable of removing 90-99% of total dissolved solids (TDS), 99% of organic, including pyrogens, and 99% of all bacteria in the feed water.

Compare
SKU: RO10000LPH Category:

Description

10000 LPH INDUSTRIAL REVERSE OSMOSIS

PLEASE NOTE!

When you consider purchasing this system, you need to know the following information as it is very important.

This system requires a pretreatment setup for it to perform like it was designed to.

Below, the sketch shows a basic pretreatment setup with the reverse osmosis system.

The above pretreatment setup is not guaranteed to work unless recommended by a sales agent according to the water analysis report from a lab.

A water analysis report is very important as it determines the pretreatment setup. As you can see in the sketch above, the pretreatment consists of a Sand/Glass Filter, Carbon Filter, and Antiscalant Dosing system.

Pretreatment setups can consist of even more items installed before the reverse osmosis system. Below is a list of items that could be required as per the water analysis report.

  1. Chlorine Dosing System
  2. Ultrafiltration System
  3. Dmi-65 Iron Removal Media Filter System
  4. Ozone Generator
  5. Flocculant System

Once all the equipment has been purchased, you will need a qualified technician to put together the complete setup. We have our own qualified technicians train by the manufacturers of the equipment to do the installation running of the setup. Should you require us to install the system for you, a quote with the installation fee will be sent to you by the sales agent in charge.

Training can also be offered to the guys you want to be the ones installing your setup instead of our technicians.

THE INDUSTRIAL REVERSE OSMOSIS SYSTEM

RO membrane water purifier uses semi-permeable spiral wound membranes to separate and remove dissolved solids, organic, sub-micron colloidal matter, and bacteria from water. Water permeates the minute pores of the membrane and is delivered as purified water. Impurities in the water are concentrated in the reject stream and flushed to drain. Reverse osmosis is capable of removing 90-99% of total dissolved solids (TDS), 99% of organic, including pyrogens, and 99% of all bacteria in the feed water.

Reverse osmosis RO machine is very dense and has a very high removal rate for viruses, ions, phage, and bacteria, at least above 3log (removal rate >99.9%).

The benefit of the water treatment system

  1. Can produce pure water continuously and is highly automatic
  2. No chemical to regeneration, easy operation
  3. RO system uses imported USA DOW membrane

Description

Capacity 10T/60000GPD
Voltage 220V/50Hz,220V/60Hz, Single phase
Recovery 50%-70%
Desalination 96%-99%
Membrane Qty 5pcs
Temp of raw water 1-45℃
Feed Water Pressure 1-5 bar
Raw water TDS 0-1000ppm
Application raw water Tap water, Brackish water, Seawater
Raw water pump: CNP, Shimge
RO Membrane  Vontron, Dow

The complete Plant Of A 10000LPH Industrial RO System

Flow Chart:

  • Raw water pump
  • Sand filter
  • Carbon filter
  • Antiscalant
  • High-pressure pump
  • RO system
Item name Material
Raw water pump SS304
The pipe of the raw water pump PVC
FRP Tank FRP
up and down water distributor ABS
Pressure gauge assembly
control valve Engineering plastics
HP PUMP SS304
RO Membrane housing FRP
Pure Flowmeter Plexiglas Panel
waste Flowmeter Plexiglas Panel
Conductivity meter engineering plastics
Pressure switch brass
 inlet valve brass
flush valve brass
Regulating valve brass
 Electronic control system air switch. electric relay. contractor. switch. LED
control box SS304 /Mild Steel
Frame SUS304
pipeline UPVC 3/4”

The complete Plant Of A 10000LPH Industrial RO System Breakdown

Raw Water Pump
(Lyson Vertical Multistage Pump – CDL-6)

Basic Information

Pump Casing Combined Verticaljoint Surface Pump
Impeller Closed
Material Stainless Steel
Engine Electric Motor
Transport Package Wooden Crate
Origin Shanghai, China
Position of Pump Shaft Vertical Pump
Mounting Height Suction Centrifugal
Usage Pump
Color Silver and Black
Trademark LYSON
Specification 120cmX100cmX60cm

Main Uses

High-rise buildings, fire protection, refrigeration systems, and industrial, agricultural, hotel, Pumping water, and fresh water.

Detailed Use

  1. Water supply: Water filtration and distribution, water supply main pipe water area, the first increase in pressure, increased pressure of high-rise buildings.
  2. Industrial pressure: Industrial production water system, cleaning system, high-pressure washing system, fire protection system.
  3. Industrial liquid conveying: Cooling and air-conditioning system, boiler feed water and condensate systems, machine Matching, acidic and alkaline medium transport.
  4. The water treatment system, water treatment system, ultrafiltration system, reverse osmosis system distillation system, Separator, and swimming pool.
  5. Irrigation: Farmland irrigates, sprinkler irrigation, drip irrigation.

The transmission medium

  1. Non-flammable and explosive medium, thin, clean, containing no solid particles or fibers such as mineral water, softened water, pure water, thin sewage water, food oil, and other light industry media.
  2. Pump the main material for stainless steel, which can be used in pumping mildly corrosive media.

Product Overview

  1. The stainless steel stamping centrifugal pump uses technology manufactured in Denmark
  2. The hydraulic model is advanced, high in efficiency, and energy-saving. The pump internal leaf adopts stainless steel stamping, smooth flow, and avoids pollution two. Seal with wear-resistant mechanical seal, no leakage.
  3. Motor using Y2 lead shell, import bearings, insulation level class F.
  4. The pump running smoothly. Low noise, reliable quality, beautiful appearance, small size, lightweight, convenient installation, and operation, is an ideal green, environmental protection, energy-saving water pump.

Product features

  1. Hot and cold clean, non-flammable and explosive, containing no solid particles or fibers of the liquid.
  2. The liquid temperature: -15Centigrade to +70Centigrade, +70 Centigrade to +115 Centigrade hot water., the temperature of the environment.
  3. The environment temperature: +40 Centigrade
  4. The minimum entrance pressure curve: NPSH +0.5m.
  5. Head of safety margin of 0.5m.

Sand Filter

Product Description:

Impurities are removed from water by passing through a bed of quartzite sand of various gradations. The installation of a Sand filter is recommended when a load of turbidity (sand, lime, scales, colloids, etc.) of water is very high, affecting the water quality and resulting in deposits and encrustations on pipelines, boilers, taps, and on domestic and industrial appliances in general. Puritech Multi-Media depth filters typically remove particles 5-15 microns in size or larger. All media included in our filters are carefully selected according to particle size, so the media retains its stratification during backwash and rinse. An automatic backwashing system removes the trapped contaminants within the filter bed and washes them down the drain.

Why use sand as filter media for water filtration and how it works?

Sand has for a long time been used to clean as well as purify the water. 4 grades of sand are majorly used for water filtration all over the world.
Today, the provision of good quality potable water is taken for granted in much of the developed world. So, how exactly does it work? Natural sand has a sub-angular to a rounded shape, that does make them ideal filtration media to be able to capture the suspended solids in the water. As a result of the high silica content, and is durable and hard-wearing, which allows it to be graded precisely so as to facilitate efficient filtering.
Sand gets to be laid on top of the supporting layer of the gravel within the filter vessel. Incoming water enters the filter and migrates through silica sand, hence successfully removing any solid or even debris from the water. As a result of its uniqueness in terms of its properties, silica sand is usually used for water filtration in a wide variety of applications that do include swimming as well as leisure, paper processing, power generation, chemical processing, and portable as well as wastewater treatment.
In the market, there are various types that are available. The pressure filters are operated with a feed pressure of two to five bar and are usually used in leisure applications. Feedwater does enter and passes through the bed of sand. The majority of particulate solids are usually captured high up in the filter beds, this kind of filter is able to capture even the small particles. The buildup of the particulate solids does cause an increase in pressure loss across the bed for a certain given flow rate. When this pressure loss or the flow rate is not acceptable bed is back washed to be able to remove accumulated particles.

Specifications:

Model Media Volume Designed Flow Rate Control Valve In/Outlet Tank Dimension
MMF-1035 30 Liters 5.5GPM 17LPM 5600FT 3/4″ 10″ x 35″
MMF-1054 50 Liters 6.6GPM 25LPM 5600FT 3/4″ 10″ x 54″
MMF-1354 70 Liters 11GPM 42LPM 5600FT 3/4″ 13″ x 54″
MMF-1465 100 Liters 13.5GPM 50LPM WS1-TC 1″ 14″ x 65″
MMF-1665 120 Liters 20GPM 75LPM WS1-TC 1″ 16″ x 65″
MMF-1865 150 Liters 21.5GPM 80LPM 2850FT 1-1/2″ 18″ x 65″
MMF-2162 200 Liters 24GPM 92LPM 2850FT 1-1/2″ 21″ x 62″
MMF-2472 300 Liters 36GPM 137LPM 2850FT 1-1/2″ 24″ x 72″
MMF-3672 600 Liters 71.5GPM 270LPM 170 2″ 36″ x 72″

Carbon Filter

Product Description:

Carbon filtering is a method of water purification that uses a piece of activated carbon to remove contaminants and impurities, utilizing chemical adsorption. Each piece of carbon is designed to provide a large section of surface area, in order to allow contaminants the most possible exposure to the filter media. Puritech carbon filters are most effective at removing chlorine, sediment

Advantages of Activated Carbon Filter

  • Chlorine Removal
  • Chlorine By-Products Removal such as THMs
  • Bad Tastes and Odors Removal
  • Turbidity Removal
  • Herbicides, Pesticides & Insecticides Removal
  • Volatile Organic Chemicals (VOCs) Removal

Activated Charcoal and How It Works

Activated charcoal (also known as activated carbon) consists of small, black beads or a solid black porous sponge. It is used in water filters, medicines that selectively remove toxins, and chemical purification processes.

Activated charcoal is carbon that has been treated with oxygen. The treatment results in highly porous charcoal. These tiny holes give the charcoal a surface area of 300-2,000 m2/g, allowing liquids or gases to pass through the charcoal and interact with the exposed carbon. The carbon adsorbs a wide range of impurities and contaminants, including chlorine, odors, and pigments. Other substances, like sodium, fluoride, and nitrates, are not as attracted to the carbon and are not filtered out. Since adsorption works by chemically binding the impurities to the carbon, the active sites in the charcoal eventually become filled. Activated charcoal filters become less effective with use and have to be recharged or replaced.

Antiscalant dosing system

Get the most out of your RO Plant with Antiscalant Chemical manufactured and supplied by Bionics Consortium Pvt. Ltd. No matter which brand or which type of reverse osmosis system you are using, our RO Antiscalant Chemical is ideal for mitigating scaling in reverse osmosis membranes of all types. It is the most economical and reliable chemical to keep a ro system healthy and deliver long-lasting performance.

RO Membrane Antiscalant Physical Properties

  • Appearance: Clear colorless to yellow liquid
  • Odor: Characteristic
  • Solubility in Water: Complete
  • pH (as-is) @ 25°C: 3-4
  • Specific Gravity: 1.10 ÷0.05

Membrane Chemical Antiscalant Features

  • Certified by NSF to NSF/ANSI Standard 60 for Drinking Water Treatment Chemicals – Health Effects.

Common Applications for AMI Antiscalant

  • Commercial Membrane Systems
  • Industrial Water Treatment Systems
  • Municipal Water Treatment Systems
  • Brackish Water Systems
  • Sea Water Systems
  • High Recovery Systems
  • Scale Inhibitor

Benefits & Advantages

  • Compatible with all leading reverse osmosis membranes
  • Delivers longer membrane life and reduced running cost
  • Effectively controls scales CaCO3, CaSO4, SrSO4, etc.
  • Good resistance to aluminum and iron oxides
  • The effective membrane-cleaning effect
  • Available to either continuous dosing or discontinuous dosing
  • Supplied in high-thickness plastic drums
  • Laboratory Tested
  • Cost-effective